We recommend a Yuba Mundo heavy duty wheelset - see below) Note - rear frame dropouts accept 14mm axle!
Colours - matt black only
The Standard V.4 Yuba Mundo but with the added convenience of electric assist!
The El Mundo comes with the same parts and components as the standard V.4 Mundo except for the following upgrades:
- Stand Alone twin-leg kickstand
- Rear Tektro mechanical disk brake
- Electric Assist
The bike is delivered fully assembled, no wires to connect. Just install the pedals, turn the bars and go.
Colour - available only in Orange
Some information about the El Mundo:
- Cost approximately 10p per charge
- Average charge will help propel you for 12-20 miles, depending on load, terrain, and your use of the electric assist, all with a top speed of 20 miles per hour.
- Brushless 250 watt front-wheel-mounted hub motor (top speed 20 mph) Ezee Motor with disc mount.
- Motorcycle-style throttle control with LED battery status indicators
- Controller with overload protection 20 amps
- Lithium LiPO 37V 10Ah (370 Wh capacity,providing a 15 to 25 km range) (shape and size subject to availability)
- 4 amps Smart charger - maximum charge time 6 hrs charging temperature +5°C +35°C
- Right hand throttle
- Limited warranty on battery and electric components [register the bike @ yubaride.com/register]
Please contact us for availability - usually despatched in about 7-10 days
Folds neatly away under the chainstays when riding.
Colour is black
A recommended companion for V.3 and V.4 Mundos (and beyond!)
This prevents the steering from 'flopping' when the bike is parked on the centre stand. This is important as if the steering flops it can unsteady a parked bike and easily get caught by passers by.
V.1 and V.2 Mundo owners can use the Hebie Steering Stabilizer - click here to buy.
The standard V.4Yuba Mundo comes with disk ready wheels and frame/fork tabs and v brakes. Why not upgrade now?!
Mechanical Tektro disc brakes set consisting of:
- Front rotor 160mm
- Rear rotor 180mm
- Caliper adapter 140/160mm
- Levers
- Cables
- Housing
Suitable for v.3 and v.4 Yuba Mundos
The Yuba Go Getter Bag is a tough 85 litre capacity pannier that clips to the main rear rack of the Yuba Mundo. It's made from thick waterproof cordura type fabric with a truck tarp type lining. It is mainly black with orange accents. There is a flap closure with 2 plastic snap buckles. Includes a detachable shoulder strap with pad.
We sell these as single bags. They are great to just have on your Mundo so that you are always prepared to carry things to or from wherever you are going. Put two of these on your Mundo and you can carry a serious amount of shopping!
NOTE - this is the new updated version - with some subtle improvements (reflective tape, irridescent end panels, engineered lid...)
Compatible with ALL types of Yuba Mundo including new v.4.
Some people like to build their own wheels, but hubs with 14mm axles aren't as readily avialable as those with 10mm axles. So; go ahead and build a wheel with 10mm (or 3/8) axle and use it on your Yuba Mundo! These little convertors will allow the axle to fit without 'play' into the Mundo dropouts.
3/8 or 10mm size (both convert to 14mm dropout) choose from the menu below
.JPG)
Another Yuba Mundo compatible seatpost - not quite as long as the Yuba Seatpost above but at 400mm it will serve all but the tallest of riders. It's also silver in colour so if you are very particular about how the components match your bike - this might be the seatpost for your Yuba!
Made from 6061 Allloy.
This simply attaches to the seatpost of your Mundo. Includes stem, bars and grips.
Running boards provide the perfect support for your passenger's feet, while doing a bit to support the plant too. Each pair is made from recycled milk jugs, so you (and your passengers) can rest a little easier.
Please note: Running Boards are compatible only with the Mundo v.3 & v.4 bikes and framesets.
• Color: Black
• Material: HDPE plastic
Adjustable length, thick and sturdy single leg kickstand - with a really wide stance!
Perfect for fitting to any model of Yuba Mundo - version 1, 2, 3 or 4. Also suitable for most other bicycles that are regularly used to carry stuff and children - that wide stance that you don't get on regular kickstands is crucial for when you are loading and unloading the bike.
The length of the leg is adjustable in length.
A simple solution allowing the Kona Ute deck to work with Yuba Go Getter Bags. Also handy as mudguard fitting spacers!
The pack comprises of six alloy spacers. By removing the Ute deck and fitting these between the deck and rack (you can use the original Ute bolts - they are long enough) you can raise the deck high enough to create a space around the edge through which will fit the buckles of the Yuba Go Getter Bag.
This also gives you more options if you are strapping items to the Kona Ute's deck.
Can also be used on the Yuba Mundo.
Hand made in the Practical Cycles workshop!
.JPG){kind=spacer}
An extra dash of safety for small feet. Keeps shoelaces, loose clothes and other danglers safely out of your rear spokes. Custom-designed panels will give you extra peace of mind.
• Color: Black
• Material: HDPE recycled plastic
• Pair
